User Tools

Site Tools


linux

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Last revisionBoth sides next revision
linux [2020/07/14 17:45] – [Cisco Catalyst 2950-48 Configuration] philiplinux [2020/07/14 17:58] – [Cisco Catalyst 2950-48 Configuration] philip
Line 35: Line 35:
 ==== Ubuntu LACP Configuration ==== ==== Ubuntu LACP Configuration ====
  
-This example shows the ''/etc/network/interfaces'' configuration using two ethernet interfaces on a server to be combined to form a LAG, and using LACP.+This example shows the ''/etc/network/interfaces'' configuration using two ethernet interfaces on a server to be combined to form a LAG, and using LACP. Here I'm using VLAN 3, 5 and 7 on the server, and they are being passed by the LAG from the switch the server is connected to. VLAN 3 is for server management access, whereas VLAN 5 and 7 are passed on to virtual machines within the server. 
 + 
 +<code> 
 +source /etc/network/interfaces.d/
 + 
 +# The loopback network interface 
 +auto lo 
 +iface lo inet loopback 
 + 
 +auto eno1 
 +iface eno1 inet manual 
 +        bond-master bond0 
 + 
 +auto eno2 
 +iface eno2 inet manual 
 +        bond-master bond0 
 + 
 +auto bond0 
 +iface bond0 inet manual 
 +        bond-mode 802.3ad 
 +        bond-miimon 100 
 +        bond-lacp-rate 1 
 +        bond-slaves eno1 eno2 
 + 
 +auto bond0.3 
 +iface bond0.3 inet manual 
 +        vlan-raw-device bond0 
 + 
 +auto bond0.5 
 +iface bond0.5 inet manual 
 +        vlan-raw-device bond0 
 + 
 +auto bond0.7 
 +iface bond0.7 inet manual 
 +        vlan-raw-device bond0 
 +         
 +auto br0 
 +iface br0 inet static 
 +        address 192.168.1.2 
 +        netmask 255.255.255.0 
 +        gateway 192.168.1.254 
 +        bridge_ports bond0.3 
 +        bridge_stp off 
 +        bridge_fd 0 
 + 
 +auto br1 
 +iface br1 inet manual 
 +        bridge_ports bond0.5 
 +        bridge_stp off 
 +        bridge_fd 0 
 + 
 +auto br2 
 +iface br2 inet manual 
 +        bridge_ports bond0.7 
 +        bridge_stp off 
 +        bridge_fd 0 
 +</code>
  
 ==== Cisco Catalyst 2950-48 Configuration ==== ==== Cisco Catalyst 2950-48 Configuration ====
Line 45: Line 101:
 <code> <code>
 interface Port-channel2 interface Port-channel2
- description V2 Trunk+ description Trunk
  switchport trunk native vlan 999  switchport trunk native vlan 999
  switchport mode trunk  switchport mode trunk
linux.txt · Last modified: 2020/07/14 18:00 by philip