Differences

This shows you the differences between two versions of the page.

--- linux [2020/07/14 17:58] – [Cisco Catalyst 2950-48 Configuration] philip
+++ linux [2020/07/14 18:00] (current) – [Cisco Catalyst 2950-48 Configuration] philip
@@ Line 93: / Line 93: @@
 </code>
-==== Cisco Catalyst 2950-48 Configuration ====
+==== Cisco Catalyst 2950G-48 Configuration ====
-Configuration snipped for a Catalyst 2950-48 running '12.1(22)EA13'. Note that the 2950-48 needs the ''flowcontrol send off'' command - other switches don't seem to need this.
+Configuration snipped for a Catalyst 2950G-48 running '12.1(22)EA13'. Note that the 2950G-48 needs the ''flowcontrol send off'' command - other switches don't seem to need this.
 For security reasons, I've made the native VLAN on the trunk to be 999, rather than the default VLAN of 1. I strongly recommend never to use VLAN1 for anything.
@@ Line 122: / Line 122: @@
 !
 </code>
+With this configuration, VLAN 999 is the native VLAN (frames sent untagged), and all other VLANs (including 1) are sent tagged.
 [[start| Back to Home page]]