Differences

This shows you the differences between two versions of the page.

--- training:apnic-ipv6-nc:lab-access [2018/04/05 01:25] – [Introduction] philip
+++ training:apnic-ipv6-nc:lab-access [2018/04/07 07:31] (current) – [Dynamips Port to Router Console Map] philip
@@ Line 8: / Line 8: @@
 To join the network which the lab environment is on, associate your laptop with the wireless network called **IPv6**. The password for this network is **8888888888** - this is ten times the number **8**.
-The method of access to each virtual router is via Telnet to a specific port on the IP of the machine that runs the virtualization platform.
+The method of access to each virtual router is via Telnet to a specific port on the IP of the machine that runs the virtualization platform. If you don't have "telnet" installed on your laptop (becoming very common on modern operating systems), check the agenda page for links to a client you can use.
-For example:
+To access the lab, use telnet to connect to the host ''lab.ws.opt'' on the specified port, for example:
-  $ telnet ws.opt 2012
+  $ telnet lab.ws.opt 2012
@@ Line 30: / Line 30: @@
 | 2023     | P2         |
 | 2024     | A2         |
+| ...      | ...        |
+| 2061     | B6         |
+| 2062     | C6         |
+| 2063     | P6         |
+| 2064     | A6         |
 | ...      | ...        |