Philip Smith's Internet Development Site

User Tools

Site Tools

Trace:
training:sanog32:0-setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
training:sanog32:0-setup [2018/07/24 11:02] – philiptraining:sanog32:0-setup [2018/07/24 11:04] – [Loopback] philip
Line 40: Line 40:
  
  
-The following configuration examples show the suggested/recommended configuration to be implemented on the routers in each group. Replace the **RX** in the examples with the router type (either **B** for Border or **C** for Core or **P** for Peering or **A** for Access or **Cust** for Customer) and Group number as appropriate.+The following configuration examples show the suggested/recommended configuration to be implemented on the routers in each group. Replace the **RX** in the examples with the router type (either **B** for Border or **C** for Core or **P** for Peering or **A** for Access) and Group number as appropriate.
  
 ==== Name the router ==== ==== Name the router ====
Line 154: Line 154:
  
  
-You will need a similar configuration to create the Loopbacks on the Peering, Access and Border router as well. The Customer router does not have a Loopback.+You will need a similar configuration to create the Loopbacks on the Peering, Access and Border router as well.
  
  
training/sanog32/0-setup.txt · Last modified: 2018/07/24 11:04 by philip