Philip Smith's Internet Development Site

User Tools

Site Tools

Trace:
training:sanog32:0-setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
training:sanog32:0-setup [2018/07/20 08:03] – created philiptraining:sanog32:0-setup [2018/07/24 11:04] (current) – [Links to other Routers] philip
Line 40: Line 40:
  
  
-The following configuration examples show the suggested/recommended configuration to be implemented on the routers in each group. Replace the **RX** in the examples with the router type (either B for Border or C for Core or P for Peering or A for Access) and Group number as appropriate. +The following configuration examples show the suggested/recommended configuration to be implemented on the routers in each group. Replace the **RX** in the examples with the router type (either **B** for Border or **C** for Core or **P** for Peering or **A** for Access) and Group number as appropriate.
- +
-The following configuration examples show the suggested/recommended configuration to be implemented on the routers in each group. Replace the **RX** in the examples with the router type (either B for Border or C for Core or P for Peering or A for Access) and Group number as appropriate.+
  
 ==== Name the router ==== ==== Name the router ====
Line 57: Line 55:
   aaa authentication login default local   aaa authentication login default local
   aaa authentication enable default enable   aaa authentication enable default enable
-  username seclab secret lab-PW+  username v6lab secret lab-PW
   enable secret lab-EN   enable secret lab-EN
   service password-encryption   service password-encryption
Line 128: Line 126:
 === Usernames and Passwords === === Usernames and Passwords ===
  
-All router usernames should be **seclab** and password should be **lab-PW**. Configuration mode password should be **lab-EN**.+All router usernames should be **v6lab** and password should be **lab-PW**. Configuration mode password should be **lab-EN**.
  
 === service password-encryption === === service password-encryption ===
Line 163: Line 161:
 Now we will configure the router physical interfaces according to the diagram. Now we will configure the router physical interfaces according to the diagram.
  
-The configuration example below shows what to do for the link between CX and BX. You will need to set up similar configuration for the links between CX and AX and between CX and PX.+The configuration example below shows what to do for the link between CX and BX. You will need to set up similar configuration for the links between CX and AX, and between CX and PX.
  
 **On CX:** **On CX:**
training/sanog32/0-setup.1532037815.txt.gz · Last modified: 2018/07/20 08:03 by philip