Differences

This shows you the differences between two versions of the page.

--- training:sanog32:0-setup [2018/07/24 11:02] – philip
+++ training:sanog32:0-setup [2018/07/24 11:04] (current) – [Links to other Routers] philip
@@ Line 40: / Line 40: @@
-The following configuration examples show the suggested/recommended configuration to be implemented on the routers in each group. Replace the **RX** in the examples with the router type (either **B** for Border or **C** for Core or **P** for Peering or **A** for Access or **Cust** for Customer) and Group number as appropriate.
+The following configuration examples show the suggested/recommended configuration to be implemented on the routers in each group. Replace the **RX** in the examples with the router type (either **B** for Border or **C** for Core or **P** for Peering or **A** for Access) and Group number as appropriate.
 ==== Name the router ====
@@ Line 154: / Line 154: @@
-You will need a similar configuration to create the Loopbacks on the Peering, Access and Border router as well. The Customer router does not have a Loopback.
+You will need a similar configuration to create the Loopbacks on the Peering, Access and Border router as well.
@@ Line 161: / Line 161: @@
 Now we will configure the router physical interfaces according to the diagram.
-The configuration example below shows what to do for the link between CX and BX. You will need to set up similar configuration for the links between CX and AX, between CX and PX, and between AX and CustX.
+The configuration example below shows what to do for the link between CX and BX. You will need to set up similar configuration for the links between CX and AX, and between CX and PX.
 **On CX:**